Your largest roof surfaces face east and west, while the small south-facing section has vents or a neighboring tree. That does not settle whether solar makes sense for your Lee’s Summit home. Ask for a comparison of the roof planes you actually have, with each one’s usable space and shade shown clearly.
Separate a general rule from your roof
The U.S. Department of Energy’s homeowner solar guide says south-facing roofs typically perform best, while other roofs may also be suitable. That is a starting point for assessment, not a promise of a particular production penalty for every east- or west-facing house. Slope, obstructions, trees, and the proposed equipment all affect the result.
Have the designer mark north, each roof plane’s direction, and the proposed panel positions on one drawing. Identify areas that cannot be used and ask why. A sketch of the complete roof is more useful than a salesperson’s description of one side as the good side.
Request separate estimates before combining roof planes
The National Laboratory of the Rockies’ PVWatts calculator uses inputs including system size, tilt, direction, and losses, and offers monthly or hourly results. Ask the installer to model the east-facing and west-facing portions separately before showing the combined estimate. Keep weather data and other shared assumptions consistent so the comparison remains meaningful.
PVWatts cautions that predictions depend on assumptions and represented site conditions. Ask how the proposal accounts for nearby trees, chimneys, and buildings. A model with an accurate street address but no realistic treatment of shade can still give an incomplete picture.
Look at when the electricity is produced
Direction affects more than the annual total. DOE’s solar interconnection webinar materials illustrate how west-facing orientation can shift peak production later in the day. Ask to see hourly patterns alongside your household’s actual usage where that information is available.
Explain when large loads run, such as cooling or vehicle charging. Do not assume that later production necessarily creates greater savings: the result also depends on consumption, export treatment, and the electricity rates that apply to your account. Have the installer identify those assumptions in any financial comparison rather than applying one retail rate to every generated kilowatt-hour.
Compare construction and service access as well as output
A layout using both sides may involve different mounting, wiring, and service-access arrangements from a smaller single-plane design. Ask what changes between the quotes and whether each option leaves appropriate access to roof features. If the roof may need work, use our Lee’s Summit roof replacement and solar planning guide before selecting panel positions.
Request the complete installed price for each layout and the reason for any equipment differences. Compare the proposed system sizes, not simply panel counts. Ask what each design would look like from the street and which components would be visible on the other side of the house.
Keep approval and backup questions separate
Roof orientation does not replace the normal review process. Our Lee’s Summit permit and Evergy interconnection guide helps organize questions about the steps before turn-on. Ask the responsible professionals to confirm the requirements for your final design.
Neither an east-facing nor a west-facing grid-tied array automatically runs the house during an outage. Backup requires compatible storage, a backup-capable inverter, and approved islanding or isolation equipment. DOE’s rooftop resilience guidance explains that distinction. Choose roof direction to answer a production question; specify backup separately if you need it.